Holland Pump Catalog - Catalog - Page 15
30-56
HYDRAULIC SUBMERSIBLE PUMP
2026-3
HSP14-D14-SS
PUMP SPECIFICATIONS
Size: 14”
Volute: Fabricated A36 steel (stailess steel as alternate
material)
Impeller: Semi-open, 6 Vane, Steel Impeller
Solids: Handles 3.5” diameter spherical compressible solids
Impeller Shaft: 304 stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic
(optional tungsten carbide or silicon carbide seals are available)
HYDRAULIC SYSTEM
Hydraulic Reservoir Level: 80 gallon capacity with twin 10 micron spin on
oil filter
Hydraulic Oil: Petroleum based AW68 Furnished standard (optional canola
bio-degradeable oil or mineral based non-toxic inherently bio-degradeable
oil available)
Hydraulic Pump: Denison vane type positive displacement pump with pilot
operated Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor in suction
bell
Heat Exchanger: Double row, SCH 40 pipe with integral intake basket
(optional engine mounted oil cooler available)
Hydraulic Hose: 50’ set of SAE 100R2, two wire & 100R12 four wire braid
high-pressure hose
Pump Head Pressure Relief System: Available as option to protect system
against improper connection or interruption of vegetable oil flow from pump
84”
145”
ENGINE SPECIFICATIONS
60”
SOUND ENCLOSURE SPECIFICATIONS
Sound Level: Holland Pump Supersilent pump units are
tested for Sound Level using the Contractors Pump Bureau
Sound Level Measurement Standard for Pump Units using
a calibrated Sound Level Meter. This procedure produces
an average Sound Level based on eight measurements
under strict conditions of pump placement. They are
tested at full RPM pumping water. The sound Level result
for the HSP14-D14-SS is 57 dBA @ 23 feet. Enclosure:
Aluminum construction, removable for ease of maintenance.
Stainless steel accessories including bolt on, lift off hinges.
Base: Environmentally safe spill containment type base
Lifting Access: External lifting bail, integral forklift pockets
Dry Net Weight (lbs)
Shipping Weight (lbs)
Skid Base
5360
5760
DOT Trailer
6060
N/A
Pump
740
740
Model: John Deere 6068HI550, Tier 4 Final Or Approved Alternate
Type: 6 Cylinder, 4 Stroke, Turbocharged, Diesel Engine
Displacement: 6.8L (414cu.in.)
Governor: Electronic
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 5 U.S. Gallons (19L)
Coolant Capacity: 5 U.S Gallons (19L)
Fuel Tank: Integral 448 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI
Starter: 12 Volt
Standard Features: Skid, SAE Flywheel Housing, SAE Flywheel, SAE B
Pump Adaptor
Control Panel: Controls Inc. (CD-83504-AS or Equal): Engine Temperature
and Low Oil Pressure with optional Gauge, Key Start, and Hour Meter,
optional add-on Cornell (Co-Pilot): Location, Engine Controller Data,
Temperature, Vibration, Flow, Pressure, Oil Level, Run-time, RPM, Amps
Optional Features: Site or DOT Highway Trailer
John Deere Published Performance: Maximum Continuous Power: 194HP
(145kW) @ 1800 RPM
Holland Pump Administration Office 2005 Vista Pkwy., West Palm Beach, FL 33411
T (561) 697-3333 E info@hollandpump.com
