Holland Pump Catalog - Catalog - Page 3
30-16
HYDRAULIC SUBMERSIBLE PUMP
2026-3
HSP4-D6-SS
TOTAL HEAD
PSI
FT
PUMP SPECIFICATIONS
Size: 4”
Volute: Fabricated A36 steel (stainless steel as alternate
material)
Impeller: Recessed vortex, 6 Vane, Steel Impeller
Solids: Handles 3” diameter compressible spherical solids
Impeller Shaft: 304 stainless steel
Seal: Rotary Mechanical, oil-lubricated, carbon & ceramic
(optional tungsten carbide or silicon carbide seals are available option)
60–
140
130
50–
120
110
100
40–
90
80
30–
70
60
20–
50
40
10–
30
20
10
0
0
100
200
300
400
500
U.S. Gallons Per Minute (GPM) @ 2000 PSI
600
700
800
HYDRAULIC SYSTEM
Hydraulic Reservoir level: 30 gallon capacity with single 10 micron spin on
oil filter
Hydraulic Oil: Petroleum based AW68 Furnished standard (optional canola
bio-degradeable oil or mineral based non-toxic inherently bio-degradeable
oil available)
Hydraulic Pump: Denison vane type positive displacement pump with pilot
operated Denison relief valve
Hydraulic Motor: Vickers vane type positive displacement motor
Heat Exchanger: Double row, Sch 40 pipe with integral intake basket (optional
engine mounted oil cooler available)
Hydraulic Hose: 50’ set of SAE 100R2, two wire braid high-pressure hose
Pump Head Fail Safe Pressure Relief System: Available as option to protect
system against improper connection or interruption of biodegradable oil flow
from pump head to power unit
ENGINE SPECIFICATIONS
SOUND ENCLOSURE SPECIFICATIONS
Sound Level: Holland Pump Supersilent pump units are
tested for Sound Level using the Contractors Pump Bureau
Sound Level Measurement Standard for Pump Units using
a calibrated Sound Level Meter. This procedure produces
an average Sound Level based on eight measurements
under strict conditions of pump placement. They are
tested at full RPM pumping water. The sound Level result
for the HSP4-D6-SS is 57 dBA @ 23 feet. Enclosure:
Aluminum construction, removable for ease of maintenance.
Stainless steel accessories including bolt on, lift off hinges.
Base: Environmentally safe spill containment type base
Lifting Access: External lifting bail, integral forklift pockets
Dry Net Weight (lbs)
Shipping Weight (lbs)
Skid Base
3002
3402
DOT Trailer
2502
N/A
Pump
180
180
Model: Deutz D2.9L4, Tier 4 Final Or Approved Alternate
Type: 4 Cylinder, 4 Stroke, Naturally Aspirated, DOC, Liquid Cooled Diesel
Engine
Displacement: 2.9L (177cu.in.)
Governor: Electronic
Lubrication: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 2.4 Gallons (9L)
Coolant Capacity: 2.1 Gallons (8L)
Fuel Tank: Integral 68 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum @ 2000 PSI
Starter: 12 Volt, 2.0 kW
Standard Features: Skid, SAE Flywheel Housing, SAE Flywheel, SAE B Pump
Adaptor
Control Panel: Controls Inc. (CD-83504-AS or Equal): Engine Temperature and
Low Oil Pressure with optional Gauge, Key Start, and Hour Meter, optional
add-on Cornell (Co-Pilot): Location, Engine Controller Data, Temperature,
Vibration, Flow, Pressure, Oil Level, Run-time, RPM, Amps
Optional Features: Site or DOT Highway Trailer
Deutz Published Performance: Maximum Continuous Power: 37HP (28kW)
@ 1800 RPM
Holland Pump Administration Office 2005 Vista Pkwy., West Palm Beach, FL 33411
T (561) 697-3333 E info@hollandpump.com
