Holland Pump Catalog - Catalog - Page 44
50-21
WELLPOINT PUMP
2026-3
WP8-SS
PUMP SPECIFICATIONS
U.S. Gallons
Per Minute (GPM)
Type/Model: 8” (200mm) Rotary Wellpoint Pump
Pump: Vogelsang 260Q, Class 30 gray cast iron casing and
smooth end cover
Solids: Handles 2.5” compressible solids
Rated Capacities: 1328 GPM (178) CFM @500 RPM
Displacement: 266 US gallons per 100 revolutions
Working Pressure: up to 70 psi (over 25 psi requires larger
engine)
Flange Connections: 8” Raised Face ANSI, 150 lbs. Flange
connections included.
Rated Speed: 0 - 500 RPM. Consult factory for
recommended operating speeds
Rotors in: Helix four wing rotors, NBR standard, other
materials available on request
Wet-Ends: Gray Cast Iron
Shaft Material: Alloy Steel, AISI 4140
Gear Material: AGMA Class 8, SAE 1045
Mechanical Seals: Duronit vs. Duronit cartridge seal
Top and Bottom Housing Segments: Stainless steel 316.
Segments adjustable based on wear.
1600
1400
1328 GPM Max
1200
1000
25 i
ps
800
600
709 GPM
400
200
0
0
300
600
900
1200
1500
1800
2100
Engine Speed (RPM)
The above curve is based on pumping clear water at 62 degrees
with no lift required and no restrictions in the discharge.
* Measured in open area on concrete surface using Contractor Bureau test method.
SOUND ENCLOSURE SPECIFICATIONS
Sound Level: Holland Pump Supersilent pump units are tested for Sound
Level using the Contractors Pump Bureau Sound Level Measurement
Standard for Pump Units using a calibrated Sound Level Meter. This
procedure produces an average Sound Level based on eight measurements
under strict conditions of pump placement. They are tested at full RPM
pumping water. The sound Level result for the W-SS is 57 dBA @ 23 feet.
Enclosure: Aluminum construction, removable for ease of maintenance.
Stainless steel accessories including bolt on, lift off hinges.
Base: Environmentally safe spill containment type base
Lifting Access: External lifting bail, integral forklift pockets
GEAR SPECIFICATION
PTO Gear Reduction: 3.75 TO 1
Gear Oil: SAE85W90 (1.3 Quarts)
ENGINE SPECIFICATIONS
Skid Base
Net Weight (lbs)
5450
Shipping Weight (lbs)
5550
Export Crate Size (cu. ft) 197
Model: Perkins 400 Series, 404FE22T, Tier 4 Final or Approved Alternate
Type: 4 Cylinder, 4 Stroke, Turbo Charged, Liquid Cooled Diesel Engine
Displacement: 2.2L (137 cu.in.)
Governor: Electronic
Lubrications: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil capacity: 2.8 U.S. Gallons (10.6 L)
Coolant Capacity: 1.1 U.S. Gallons (4.2 L)
Fuel Tank: Integral 68 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 68 Hours Minimum
Starter: 12 Volt, 2.0 kW
Standard Features: Skid, SAE Flywheel Housing, SAE Flywheel, SAE B
Pump Adaptor
Control Panel: Controls Inc. (CD-83504-AS or Equal): Engine Temperature
and Low Oil Pressure with optional Gauge, Key Start, and Hour Meter,
optional add-on Cornell (Co-Pilot): Location, Engine Controller Data,
Temperature, Vibration, Flow, Pressure, Oil Level, Run-time, RPM, Amps
Optional Features: Site or DOT Highway Trailer
Perkins Published Performance: 31HP (23kW) Continuous @ 1800 RPM
Holland Pump Administration Office 2005 Vista Pkwy., West Palm Beach, FL 33411
T (561) 697-3333 E info@hollandpump.com
