Holland Pump Catalog - Catalog - Page 46
50-26
WELLPOINT PUMP
2026-3
WP10-SS
PUMP SPECIFICATIONS
Size: 10” Rotary Pump
Pump: Vogelsang, Class 30 gray cast iron casing and smooth
end cover
Solids: Handles up to 3” (76mm) compressible soft solids
Rated Capacities: 1995 GPM (453) CFM @500 RPM
Displacement: 399 US gallons per 100 revolutions
Working Pressure: up to 85 psi (5.9 bar) (over 25 psi
requires larger engine)
Flange Connections: 10” (250mm) Raised Face ANSI, 150
lbs. Flange connections included, stainless stell
Rated Speed: 0 - 500 RPM. Consult facotry for
recommended operating speeds
Rotors in: Helix four wing rotors, NBR standard, other
materials available on request
Wet-Ends: ASTM A48 Class 30 gray iron
Shaft Material: Alloy Steel, AISI 4140
Gear Material: AGMA Class 8, SAE 1045
Gear Chamber: SAE 85W90 gear oil (3.0 quarts)
Quench Chamber: SAE 85W90 gear oil (3.5 quarts)
Mechanical Seals: Duronit vs. Duronit cartridge seal
Vibration: Pumps and motors operate at any point
within their operating range without undue noise and
vibration
Top and Bottom Housing Segments: ASTM A48 Class 30
gray iron. Segments adjustable based on wear.
Approx. Weight: 305 lbs. (138.3 kg)
SOUND ENCLOSURE SPECIFICATIONS
Sound Level: Holland Pump Supersilent pump units are tested for Sound
Level using the Contractors Pump Bureau Sound Level Measurement
Standard for Pump Units using a calibrated Sound Level Meter. This
procedure produces an average Sound Level based on eight measurements
under strict conditions of pump placement. They are tested at full RPM
pumping water. The sound Level result for the WP10-SS is 57 dBA @ 23 feet.
Enclosure: Aluminum construction, removable for ease of maintenance.
Stainless steel accessories including bolt on, lift off hinges.
GEAR SPECIFICATION
PTO Gear Reduction: 4.21 to 1 (at 2100 engine RPM the pump speed is
500 RPM)
Gear oil: SAE85W90 (1.3 Quarts)
ENGINE SPECIFICATIONS
Skid Base
Net Weight (lbs)
5450
Shipping Weight (lbs)
5550
Export Crate Size (cu. ft) 197
Model: Hatz 4H50TIC, Tier 4 Final or Approved Alternate
Type: 4 Cylinder, 4 Stroke, Liquid Cooled Diesel Engine
Displacement: 2.0 L (119 cu.in.)
Governor: Electronic
Lubrication: Forced Circulation
Air Cleaner: Dry Type with Replaceable Element
Lube Oil Capacity: 1.85 U.S. gal (7L)
Coolant Capacity: 3.3 U.S. gal (12.5L)
Fuel Tank: Integral 114 U.S. Gallon Capacity (#2 Diesel Fuel)
Full Load Operating Time: 60 Hours Minimum
Starter: 12 Volt
Standard Features: Skid, SAE Flywheel Housing, SAE Flywheel, SAE B
Pump Adaptor
Control Panel: Controls Inc. (CD-83504-AS or Equal): Engine Temperature
and Low Oil Pressure with optional Gauge, Key Start, and Hour Meter,
optional add-on Cornell (Co-Pilot): Location, Engine Controller Data,
Temperature, Vibration, Flow, Pressure, Oil Level, Run-time, RPM, Amps
Optional Features: Site or DOT Highway Trailer
Coupling: Stromag coupling
Hatz Published Performance: Power: 74HP (55kW) Continuous @ 2800
RPM
Holland Pump Administration Office 2005 Vista Pkwy., West Palm Beach, FL 33411
T (561) 697-3333 E info@hollandpump.com
