Holland Pump Catalog - Catalog - Page 47
50-12
WELLPOINT PUMP
2026-3
WP10 (VAWP)
PUMP SPECIFICATIONS
Size: 10”
Make: Complete Dewatering
Model: CW10, 10” end suction centrifugal, long coupled
Casing: Cast Iron
Impeller: Enclosed 11.3”, 4-vane, bronze
Seal: Double sintered bronze / steel
Coupling: Long coupled, doughnut type elastomeric element
Suction, Discharge: 10” x 10” nominal straight pipe, cam-lock or
Bauer fittings optional
Dimensions
Frame Mount:
Length 10.5’ (126”, 320 cm)
Width 4.2’ (50”, 127 cm)
Height 5.9’ (70”, 178 cm)
Weight 5000 lbs. (2275 kg)
Wheel Mount:
Length 15.0’ (180”, 457 cm)
Width 6.7’ (80”, 204 cm) )
Height 6.5’ (78”, 198 cm)
Weight 6200 lbs. (2820 kg)
DIESEL CONFIGURATION
Deutz TCD3.6 EPA Tier 4 Final liquid cooled turbo diesel
engine, 80 cont. hp @ 1800 rpm
Full instrument panel with safety shutdowns
ELECTRIC CONFIGURATION
75 HP, 1800 rpm, 460 volt, 3 phase TEFC motor
96 FL Amps @ 460 volts, 1.15 SF
NEMA control panel with external disconnect, fuse block,
magnetic contactor, adjustable overload
OPTIONS
Wheel mounts and trailer options
Automatic priming system
Increased fuel capacity
Sound attenuated full or partial enclosures
PERFORMANCE
Pumping Capacity: to 4400 gpm (16650 l/m)
Head Capacity: to 108’ (32.9 m)
Suction Lift: to 24’ (7.3 m)
Solids Capacity: to 1-1/2” spherical (3.8 cm)
ENGINE SPECIFICATIONS
Make / Model: Deutz TCD3.6L4 turbo diesel or Approved Alternate
Emissions: EPA Final Tier 4
Type: 4-cylinder liquid cooled diesel
Horsepower: 80hp continuous at 1800 rpm
Fuel Consumption: approx. 4.1 gph at full load
Control Panel: Controls Inc. (CD-83504-AS or Equal): Engine
Temperature and Low Oil Pressure with optional Gauge, Key Start,
and Hour Meter, optional add-on Cornell (Co-Pilot): Location, Engine
Controller Data, Temperature, Vibration, Flow, Pressure, Oil Level,
Run-time, RPM, Amps
Fuel Filters: Dual fuel filter system with fuel/water separator
Holland Pump Administration Office 2005 Vista Pkwy., West Palm Beach, FL 33411
T (561) 697-3333 E info@hollandpump.com
